Use of styryl 11 and STaR 11 for the luminescence enhancement of cyanoacrylate-developed fingermarks in the visible and near-infrared regions

In current casework, most post-cyanoacrylate stains rely on luminescence emission in the visible region (400-700 nm). While traditional stains such as rhodamine 6G work well under most circumstances, some surfaces may generate background luminescence under the same conditions. Detection in the near-infrared region (NIR > 700 nm) has shown to be effective in minimizing the interferences from such surfaces. The laser dye styryl 11 generated strongly luminescent fingermarks when applied after cyanoacrylate fuming on all surfaces tested. When compared to rhodamine 6G, the dye was superior only when viewed in the NIR. Styryl 11 was subsequently combined with rhodamine 6G, and the mixed stain formulation (named StaR 11 by the authors) induced stronger luminescence compared with styryl 11 alone with an ability to visualize in both the visible and NIR regions. Reliable and consistent results were obtained when using either styryl 11 alone or the STaR 11 mixture. The enhancement achieved did not otherwise vary depending on the source of the fingermark secretions. With visualization possible in both the visible and NIR regions, the styryl 11/rhodamine 6G mixture showed significant potential as a post-cyanoacrylate stain.     

An investigation into the use of a portable cyanoacrylate fuming system (SUPERfume®) and aluminum powder for the development of latent fingermarks

Abstract: Few techniques offer “in situ” methods of friction ridge skin mark development. “In situ” development reduces mark transportation, degradation, and often cost. The effectiveness of cyanoacrylate fuming using the SUPERfume^® and dusting with aluminum powder for latent fingermark development on several nonporous surfaces, stored in various temperature environments for time periods up to 52 weeks, was investigated. Five thousand and four hundred latent fingermarks were deposited under controlled conditions and graded. The results suggested that cyanoacrylate fuming (SUPERfume^®, Foster and Freeman, U.K.) was more effective at developing latent fingermarks on textured and smooth plastic surfaces and for marks stored in temperatures of 37°C, whereas aluminum powder was more effective on glass, enameled metal paint, and varnished wood, and for storage temperatures below 20°C. There were no significant benefits to using either technique for marks older than 24 h, but it was possible to develop fingermarks following 52 weeks of storage using both techniques.     

Forensic identification science evidence since Daubert: Part I--A quantitative analysis of the exclusion of forensic identification science evidence

The U.S. Supreme Court decisions in Daubert v. Merrell Dow Pharmaceuticals Inc. and Kumho Tire Co. Ltd. v. Carmichael transformed the way scientific expert evidence was reviewed in courts across the United States. To gauge the impact of these rulings on the admission of forensic identification evidence, the authors analyzed 548 judicial opinions from cases where admission of such evidence was challenged. Eighty-one cases (15%) involved exclusion or limitation of identification evidence, with 50 (65.7%) of these failing to meet the "reliability" threshold. This was largely because of a failure to demonstrate a sufficient scientific foundation for either the technique (27 cases) or the expert's conclusions (17 cases). The incidence of exclusion/limitation because of a lack of demonstrable reliability suggests that there is a continuing need for the forensic sciences to pursue research validating their underlying theories and techniques of identification to ensure their continued acceptance by the courts.     

Initial Results on the Composition of Fingerprints and its Evolution as a Functionof Time by GC/MS Analysis

Abstract: Determining the time since deposition of fingermarks may prove necessary to assess their relevance to criminal investigations. The crucial factor is the initial composition of fingermarks, because it represents the starting point of any aging model. This study mainly aimed to characterize the initial composition of fingerprints, which show a high variability between donors (inter‐variability), but also to investigate the variations among fingerprints from the same donor (intra‐variability). Solutions to reduce this initial variability using squalene and cholesterol as target compounds are proposed and should be further investigated. The influence of substrates was also evaluated, and the initial composition was observed to be larger on porous surface than nonporous surfaces. Preliminary aging of fingerprints over 30 days was finally studied on a porous and a nonporous substrate to evaluate the potential for dating of fingermarks. Squalene was observed to decrease in a faster rate on a nonporous substrate.     

Comparative study of electrochromic enhancement of latent fingerprints with existing development techniques

To address the challenge of capturing latent fingerprint evidence from metal surfaces, a new method of latent fingerprint enhancement based on electrochromic polymer films has recently been developed. Here, we present a study comparing the development and visualization of nonvisible fingerprints on stainless steel substrates using this electrochromic enhancement approach with three classical methods (dusting, wet powder, and cyanoacrylate fuming). Two variants of the electrochromic enhancement method were utilized with polyaniline and poly(3,4-ethylenedioxythiophene) as the electrochromic materials. Fingerprint samples were taken from different donors (varying in age and gender) and were exposed to different environments for systematically varied periods of time (up to 28 days). The environments represent plausible evidential scenarios: left under ambient conditions, washed with aqueous soap solution, washed with acetone, submerged in water, and maintained at elevated temperature. The electrochromic enhancement procedure frequently outperformed the traditional methods, particularly for samples exposed to more challenging histories.     

Effect of chloride ion concentration on the galvanic corrosion of α phase brass by eccrine sweat

Inductively coupled plasma mass spectrometry measurement of the relative concentration of sodium, chloride, calcium, and potassium ions in eccrine sweat deposits from 40 donors revealed positive correlations between chloride and sodium (ρ = 0.684, p < 0.01) and chloride and calcium ions (ρ = 0.91, p < 0.01). Correlations between ion concentration and the corrosion of α phase brass by the donated sweat were investigated by visual grading of the degree of corrosion, by measuring the copper/zinc ratio using energy-dispersive X-ray spectroscopy, and from a measurement of the potential difference between corroded and uncorroded brass when a large potential was applied to the uncorroded brass. An increasing copper/zinc ratio (indicative of dezincification) was found to correlate positively to both chloride ion concentration and visual grading of corrosion, while visual grading gave correlations with potential difference measurements that were indicative of the preferential surface oxidation of zinc rather than copper.     

Detection of latent bloodstains beneath painted surfaces using reflected infrared photography

Bloodstain evidence is a highly valued form of physical evidence commonly found at scenes involving violent crimes. However, painting over bloodstains will often conceal this type of evidence. There is limited research in the scientific literature that describes methods of detecting painted-over bloodstains. This project employed a modified digital single-lens reflex camera to investigate the effectiveness of infrared (IR) photography in detecting latent bloodstain evidence beneath a layer or multiple layers of paint. A qualitative evaluation was completed by comparing images taken of a series of samples using both IR and standard (visible light) photography. Further quantitative image analysis was used to verify the findings. Results from this project indicate that bloodstain evidence can be detected beneath up to six layers of paint using reflected IR; however, the results vary depending on the characteristics of the paint. This technique provides crime scene specialists with a new field method to assist in locating, visualizing, and documenting painted-over bloodstain evidence.     

Study of poroscopy among South Indian population

Poroscopy is the term applied to a specialized study of pore structure found on papillary ridges of skin as a means of identification. It comes under level 3 detail of identification and hence is more reliable and accurate. The goal of this study is to estimate the importance of poroscopy for identification of individuals and to determine the gender based on frequency, type, and shape of pores. Left plain thumb prints of 200 individuals (100 men and 100 women) aged between 18 and 60 belonging to South Indian population were observed. The results have shown that women tend to have a significantly higher frequency of pores than men. Number of pores ≤ 8 pores/25 mm(2) is more likely to be of male origin and ≥9 pores/25 mm(2) is more likely to be of female origin. There was no significant sex difference based on type and shape of pores.     

指纹乳突纹线密度的性别差异初探

目的针对指纹纹线密度在不同性别间是否存在差异进行了研究和探索。方法实验对80个（其中男女各40人）中国汉族人十指纹线密度进行计数,将所得数据通过SPSS软件进行统计分析。结果指纹纹线密度均值男性少于14.5线/25mm2,女性大于等于15线/25mm2。结论男女之间指纹密度存在差异;女性指纹纹线密度较男性高。     

论纸张上潜在指印显现效果的影响因素及对策

潜在指印是目视不可见的指印反映形象,纸张上潜在指印的显现效果受造型主体及作用力大小、纸张状态及媒介物差异、遗留时间及环境条件等众多因素的影响。在实际工作中,为获取理想稳定的纸张潜在指印显现效果,必须在充分了解检材特性的前提条件下,选择与之适配的显现方法,其基本原则是先作无损显现,再选择破坏性相对较轻的有损法,最后才是可能改变检材原有理化特性的其他方法。